Hey Babe, Thanks for purchasing from us!  You'll find all the pressing instructions for our transfers here.  Any questions, feel free to contact us! :) 

THIN MATTE CLEAR FILM SCREENPRINTS

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 325°F
Pressure: Heavy  (if print doesn't stick, this is likely the biggest reason why.  Make sure your press is on heavy pressure!)
Time: 15-20 Seconds
Peel: Hot
Do not cover with any Teflon etc.  If print needs an additional press, please use parchment paper over it. 

*Please note the time and temp are suggested and you may have to adjust based on your own presses best settings.  

ONE COLOR SCREENPRINTS

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 325-350°F
Pressure: Heavy
Time: 7 Seconds
Peel: Hot

GLOW IN THE DARK SCREENPRINTS

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 305-325°F
Pressure: Heavy  (if print doesn't stick, this is likely the biggest reason why.  Make sure your press is on heavy pressure!)
Time: 10 Seconds
Peel: Hot
Do not cover with any Teflon etc.

These prints need to be charged by light.  If you find they are not glowing after awhile, simply put in light and recharge them.  Quick recharge by putting under a lamp or led light source.  

PUFF PRINT ONE COLOR

Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 350°F
Pressure: Heavy 
Time: 7 Seconds
Peel: Hot
Do not cover with any Teflon etc.  If print needs an additional press, please use parchment paper over it. 

UV DTF WRAPS & DECALS

Application Instructions

1. Peel design transfer off of backing.

2. Place the transfer on the cup ensuring design is straight and positioned correctly.

(The adhesive is very strong. Once the transfer touches the glass its impossible to take off)

3. Press the transfer down, working from the centre outwards, pushing out any bubbles.

4. Rub all over the design with your fingers.  The more rubbing the better.

5. Peel clear film off and you're done!

Hand wash only.  We do not advise to put in dishwasher or microwave.

We are not responsible for application mishaps.

*Please note:  Not all brands of 16 oz. glass cups have the exact same measurements. They can differ by a couple of millimetres. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*